We typically ship your component the same day*
Shop
Platforms
Project Hub

Product of the Week

Discover something cool for your next hardware project.

Electromaker Educator

Allow our very own in-house electronics engineer extraordinaire teach you something new.

The Electromaker Show

Watch our weekly YouTube show hosted by Ian Buckley.

The Electromaker Podcast

Listen to the Electromaker Show on the go!

Blog
Join us
0
Super ESP32 M5Dial! Soldering and AI funding projects, new PocketBeagle, and More!
0:00:00 / -
Watch now on YouTube Watch now
 

Luminosity Sensor For Home Assistant
Make a luminosity sensor with a Wemos D1 mini and interface it with your HA. Prevent your lights to turn on if sufficient luminosity

Wearable Mk Iv Arc reactor
With the recent Sony/Disney disputes, what better time to make a wearable Arc Reactor from Iron Man 2?!

Lightsaber - Guide
A low cost, mostly 3D printed and collapsible lightsaber. A 3 watt RGB LED allows for a choice between red, green and blue shafts and the collapsible nature of the shaft makes it easy to store and transport.

Control Insteon Lights Wirelessly Using Motion Detection!
This project will use the EZ-BT Bluetooth Mesh Development Kit with one board located in each room to monitor. The motion sensor detects when someone enters the room and turns on the light. After motion is not detected for a defined period, the lights automatically turn off.

Home Automation Using Raspberry Pi Matrix Voice And Snips
Controlling lights, door and light intensity using Raspberry Pi, Matrix Voice and Snips.

Rgb Potion
A fully RGB colour customisable potion!

Infinity Gauntlet
Making an Infinity Gauntlet to interface with my Artificial Life project.

Color Control For Rgbw Led Stripes
For using RGBW LED stripes properly, I was missing an easy control of color and brightness. Based on the PIC16F1827 I developed a control card using the serial line for communication and a Raspberry PI showing the Web based control page as part of my home control system.

All In One Led Light
Built Smart LED light with auto ON/OFF, brightness control and night mode using Microchip AVR iot WG development Board with Open Weather Maps and local time

Avengers: Endgame Posters On Adafruit Pyportal
The Adafruit PyPortal IoT device is Python powered and used to display the Avengers Endgame character posters.

Design Bedroom Lamp
Lamp as an interior design accessory. Good idea for gift.

Pwm On Mikrobus Header Of Avr Iot Wg
Atmel Start only support PWM functionality for ERR (Red), DATA (Yellow) and CONN (green) of AVR iot WG board. Here we will learn to configure TCA timer in split mode to enable PWM on mikroBUS header of this board.

Easy Ina219 Interfacing With Avr Iot Wg
The INA219B breakout board can measure both the high side voltage and DC current draw over I2C with 1% precision and help in solving the power-monitoring problems.

Asmd Shock Rifle
Making the Shock Rifle from Unreal Tournament real!

Terminator Glasses
Adding a moving red eye to the iconic Terminator Glasses.

Tinned Heisenberg Principle
Trying to simulate the Heisenberg Principle in a mint tin.

Nerf Scope Module | Arduino project
When a Nerf gun doesn't have a scope, add a movable one with an Arduino and a servo!

Bitcoin Tracker Using A Raspberry Pi
The Bitcoin Tracker can display information such as Price, Bitcoins in circulation, No. of Bitcoins left to mine, Hash Rate, etc
Trustpilot