Banana Pi Bpi-r2 Open Source Smart Router With Mtk

The Banana Pi R2 is a router based development board, which can run on a variety of open source operating systems including OpenWrt, Android

Banana Pi Bpi-m4 With Rtd1395 Quad-core Cpu,arm Co

Banana Pi BPI-M4 use Realtek RTD1395 chp design ,it is a 64-bit quad-core A53 single board computer. It features 1 GB of RAM and 8 GB eMMC

Sony Spresense 120/240 Volt Power Supply Module

120/240V AC or 30V DC power supply module for the Sony Spresense Expansion Board. Plug and power your projects for real world.

120/240 Particle Wifi Switch And Sensor

After researching the Sonoff WiFi switch, I decided to build my own switch box mountable 120V input IoT switch.

Netduino Connected Appliance Shield

Same code as example but with a scaled down single shield with 120 VAC in powering the Netduino and a relay to turn your appliance on/off.

Complete Raspberry Pi / Nova Wireless Home Monitoring

The Raspberry Pi is an awesome little device. I will show how you can have a complete standalone wireless/wired home automation system.

Presentation Controller For Powerpoint With The Tactigonskin

We made this project to show an example of how you can integrate the T-Skin into everyday tasks making them more interesting and intuitive.

How To Create Ble-wifi Range Extender For T-skin

We wanted to increase the communication range of the Tactigon Skin so we could use it over longer distances than BLE can offer.

Smart Power Strip V2.0

Build your own easy or simple DIY smart power strip to control electrical devices from remotely.

Home Automation Using Raspberry Pi Matrix Voice And Snips

Controlling lights, door and light intensity using Raspberry Pi, Matrix Voice and Snips.

Smart Switch Using Arduino And Alexa

Temperature sensor is used to control a switch (relay) to turn on or off the device.

Bpi:bit Webduino And Arduino Board With Eps32 ,

Banana Pi BPI:bit for STEAM education,support webduino,arduino,microPython,Scratch.x

Banana Pi Bpi-w2 With Realtek Rtd1296 Chip Design

The Banana Pi BPI-W2 is a router based development board, which can run OpenWrt, linux ,android

Banana Pi Bpi-m2+ (bpi-m2 Plus) Open Source Sbc

Banana pi BPI-M2+ (BPI-M2 plus) quad core singel-board computer, with allwinner H3 chip design http://www.banana-pi.org

Bpi-p2 Zero Quad Core Open Source Single-board Computer

Banana Pi BPI-P2 Zero is an ultra compact single board computer measures only 65mm*52.5mm. It uses quad-core Cortex A7 allwinner H2+ processor(Option : H3 and H5), with 512MB RAM memory.8G eMMC flash,100M LAN,add PoE function

How To Make An Adjustable 555 Timer Relay Switch

Learn how to make a precisely adjustable timer with a variable delay from 1 - 100 seconds that uses the 555 IC. The 555 timer is configured as a Monostable Multivibrator. The output load is driven by the relay switch which is in turn controlled by the timer circuit.

Monitor Your Energy Bill Via Modbus, Mkr Wifi 1010 And Rs485

Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.

Follow Me Light

use wifi singnal make light can auto on/off when you near it or leave.