Environmental Sensing projects

How To Use Max6675 Thermocouple Module & Tm1637 Led Display

In this tutorial we are going to learn how to use MAX6675 Thermocouple Module & TM1637 LED to Display a temperature using probe sensor.

Change Random Colors Neopixel Shield Adafruit & Arduino

How to use Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix by randomly changing each Pixels color. Watch the Video!

Display Text On Adafruit Neopixel Shield For Arduino

In this tutorial you will see how to display a text on the Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix

Gesture Recognition Using Raspberry Pi Pico And Edge Impulse

In this project, we will learn how to write a Hand Gesture recognition program for Raspberry Pi Pico using Edge Impulse platform.

Iot Weather Data Logger Using Blues Wireless& Qubitro

This guide will help you to build an IoT-based weather data logger using the Blues Wireless Notecard and Notecarrier.

How To Make Usb To Ttl Converter (ch340)

let's build a USB to TTL converter

All About Nrf24l01 Modules

In this tutorial, I am going to show you guys how to use this transceiver module to add wireless communication between two or more Arduino boards.

Predictive Maintenance Of Compressor Water Pumps

Applying sensor fusion with RSL10 and Bosch sensors to run a TinyML model for predictive maintenance of compressor water pumps.

Read Real-time Air Quality Sensor Data From Stm32

This project is about reading real-time temperature, humidity sensor data from STM32 Nucleo-144 using Bluetooth.

Gsm & Sms Enabled Ai-driven (tinyml) Water Pollution Monitor

Via MKR GSM 1400, collate water quality data from resources over GPRS to train a Neuton model, run the model, and transmit results via SMS.

Smart Home Fire Detector Iot Project

This is a Smart Home Fire Detector IoT project that sends temperature and air quality index to AWS IoT Core every 60 seconds. The IoT Core writes this data to Amazon Timestream. If the temperature is above 35 degrees and AQI is more than 200, it triggers the alarm.

Greenhouse Control System

IoT project to read environmentals viz. temperature, humidity and light, and control a water pump for irrigation, open/close ventilation windows via servos and operate a diesel heater. Water level and enviro info sent up to the Cloud on a regular basis e.g. 15 minutes. This is ideal for a greenhouse located away from Wi-Fi.

Smart Home Monitoring With Nordic Thingy:91 & Edge Impulse

The temperature and humidity have to be monitored continuously and the level of air quality and heat levels are used as an interrupt to prevent accidents using Nordic Thingy:91 & Edge Impulse.

Calido - Open-source Thermostat And Home Controller/monitor

Calido is a smart thermostat and smart-home controller and monitor. Accessible via HomeAssistant, or a wall-mounted connected screen You are able to monitor and (automatically or not) control the temperature, humidity and overall air quality inside your home. It will also be able to control other smart-home devices accordingly.

Shop

Project Hub

Video

Blog

Apply a Filter

Category

Difficulty