We typically ship your component the same day*
Shop
Platforms
Project Hub

Product of the Week

Discover something cool for your next hardware project.

Electromaker Educator

Allow our very own in-house electronics engineer extraordinaire teach you something new.

The Electromaker Show

Watch our weekly YouTube show hosted by Ian Buckley.

The Electromaker Podcast

Listen to the Electromaker Show on the go!

Blog
Join us
0
Super ESP32 M5Dial! Soldering and AI funding projects, new PocketBeagle, and More!
0:00:00 / -
Watch now on YouTube Watch now
 

The Nvidianator
The sequel to my Raspbinator Terminator Skull project.

Simon Says Game - 3d Printable | Arduino Nano | Diy Project
Print, assemble and program your own Simon Says game. How much of the randomly generated colour pattern can you memorise and repeat back? Not sure, then why not make one and find out. With an Arduino Nano at its core this project also incorporates an OLED screen, passive buzzer and some big bright buttons.

Banana Pi Bpi-w2 With Realtek Rtd1296 Chip Design
The Banana Pi BPI-W2 is a router based development board, which can run OpenWrt, linux ,android

Banana Pi Bpi-m2 Zero(h2+) Quad Core Sbc
Banana PI BPI-M2 Zero is the open source hardware platform,Banana PI BPI-M2 Zero is an quad core version of Banana Pi,it support WIFI,same size as raspberry pi zero W

Four Pies
We give you a quick overview and build a project to welcome the Raspberry Pi 4 to the world!

3d Printed Camshaft Text Display Using Evive
The DIY camshaft home decor with animated text display is one easy DIY Project you can make using some 3D printing, evive (Arduino), DC Motor...

Automatic Smart Plant Pot - 3d Printable
Sometimes when we go away from home for a few days or are really busy the house plants (unfairly) suffer. This is my solution a Smart Plant Pot which includes integrated water tank, soil moisture sensor, water level sensor, pump and status LED all controlled by an Arduino Nano.

Pick-a-plant
Choose the right plant for you, using Pick-A-Plant. This IoT device will help you find the best match for every location, using Microchip's AVR-IoT WG Development Board.

Youtube Subscriber Counter - Solderless, 3d Printable, Cheap
I've always wanted a YouTube counter for my channel but they often cost more than I wanted to pay and required a YouTube API key. This design is buildable for under £15/$18, does not need an API key and sits on top of a monitor, stands on a surface or can wall mounted.

C51 4 Bits Electronic Clock - Wooden Clock
Had some spare time this weekend so went ahead and assembled this AU$2.40 4-Bits DIY Electronic Digital Clock which I bought from AliExpress a while ago.

Motorized Camera Slider
Customizable camera slider with OLED screen and extended options

Nicole-o-meter
How many Nicoles are there in Belgium? Use this awesome 3D-printed map to find out!

Making Musicpi: Amazon Echo Music Streamer
Stream your local music library to Amazon Echo for FREE!

Arduino Based Coin Sorting And Counting Machine
This Arduino powered machine separates coins of different dominations and then tallies up their total value. This is shown on an 8 digit 7 segment display. It is a coin sorter / coin counter machine! Reflected infrared sensors (TCRT5000s) are used to detect the coins.

Zelda Princess Hilda Led Staff Powered By Arduino
Arduino Gemma and Neopixel LEDs to give some life to my 3D Printed Princess Hilda Staff: Zelda Link Between Worlds.

Cyberpunk 3d-printed Fabric Light-up Corset
3D-printed spikes on fabric and using a Circuit Playground that reacts with movement to light up NeoPixels.

Homemade Handheld Console
A step by step guide for building your own handheld gaming console using a raspberry pi.

Alexa Curtain Control System - 3d Printable And Low Cost
I decided to remove the chore of opening and closing curtains. This means running into every room in the house 730 fewer times a year! (Not to mention it's super cool). Once setup you can also add routines in Alexa to have your curtains work in tandem with other devices in your house.
Trustpilot