Amazing Open Source Raspberry Pi Pico 2 Synth, Cutting Edge Power over Skin Research, and much more!

0:00:00 / -

Watch now on YouTube Watch now

Led Cube 100x100x100

Made by matovidovic / Art / Displays / Garden / Lights / Photos & Video

About the project

This cube can be used for many things such like advertisement, decoration, tourist attraction. THIS IS REVOLUTION OF WATCHING IN 3D!!

Project info

Difficulty: Moderate

Platforms: Arduino

Estimated time: 2 weeks

License: Apache License 2.0 (Apache-2.0)

Items used in this project

Hardware components

	5mm ,3V, LED diode	x 1000000
	A000067 AVR ARDUINO MEGA2560 REV 3	x 6
	I/O EXPANDER MCP23017 (MADE BY E-RADIONICA)	x 36
	DC battery 12V	x 5

Story

LED cubes are very simple but very interesting. They dont look like something important for the future but I think that they are very necessary for future development. They are so interesting because they are like 3D monitors, I can even see in about 10 years they are going to be used for gaming, geographics, architecture... Literaly they can be usefull anywhere.

How would I make it?

Well I would solder them like flats, connect them how they should be connected, then connect them with arduino boards, and then I would put some kind of a protective glass over it so you can even put it somwhere in the garden or square and dont worry if it gets rainy. And in the end I would write code and that would be it.

P.S.

And guys i put simplified picture in schematics, only diffrence is that mine has 100 transistors and 10000 anodes connected to pins. I hope this project looks cool and interesring, Thank you!

Schematics, diagrams and documents

Electronic scheme

The only diffrence is that im gonna have 100 transistors and not 9 anodes but 10000 anodes

Code

LED cube code

well this is the code from 3x3x3 led cube just for the first floor but it is the sam process, you just have more pins and transistors

int tran=2;
int ano1=4;
int ano2=5;
int ano3=6;
int ano4=7;
int ano5=8;
int ano6=9;
int ano7=10;
int ano8=11;
int ano9=12;

void setup() {
  pinMode(tran,OUTPUT);
  pinMode(ano1,OUTPUT);
  pinMode(ano2,OUTPUT);
  pinMode(ano3,OUTPUT);
  pinMode(ano4,OUTPUT);
  pinMode(ano5,OUTPUT);
  pinMode(ano6,OUTPUT);
  pinMode(ano7,OUTPUT);
  pinMode(ano8,OUTPUT);
  pinMode(ano9,OUTPUT);

}


void loop() {
  digitalWrite(tran,HIGH);

  
   digitalWrite(ano1,HIGH);
   delay(200);
   digitalWrite(ano1,LOW);
   delay(200);
   
   digitalWrite(ano2,HIGH);
   delay(200);
   digitalWrite(ano2,LOW);
   delay(200);
   
   digitalWrite(ano3,HIGH);
   delay(200);
   digitalWrite(ano3,LOW);
   delay(200);
   
   digitalWrite(ano4,HIGH);
   delay(200);
   digitalWrite(ano4,LOW);
   delay(200);
   
   digitalWrite(ano5,HIGH);
   delay(200);
   digitalWrite(ano5,LOW);
   delay(200);
   
   digitalWrite(ano6,HIGH);
   delay(200);
   digitalWrite(ano6,LOW);
   delay(200);
   
   digitalWrite(ano7,HIGH);
   delay(200);
   digitalWrite(ano7,LOW);
   delay(200);
   
   digitalWrite(ano8,HIGH);
   delay(200);
   digitalWrite(ano8,LOW);
   delay(200);
   
   digitalWrite(ano9,HIGH);
   delay(200);
   digitalWrite(ano9,LOW);
   delay(200);
}

Credits

matovidovic

I am 16 years old, I go to school for technician for mechatronics, I like electonics and programming so I like to work with Arduino.

Shop

Project Hub

Video

Blog

Shop home

3D printing

Single Board Computers

Development kits

Sensors

Internet of things

Robotics

Accessories

Product of the Week

Electromaker Educator

The Electromaker Show

The Electromaker Podcast

Led Cube 100x100x100

About the project

Project info