Arduino Chocolate Candy Toy Vending Machine

Made by GhostGamerSL / 3D Printing / Automotive / Food & Drinks / Robotics

About the project

Chocolate candy Toy Vending Machine made using Arduino Technology. There is a phone device connected to the machine to control the machine. Once the candy is selected and the payment is done the candy will fall out to the container where the user can receive it. The machine cover is built our of building blockes.

Project info

Difficulty: Difficult

Platforms: Arduino

Estimated time: 1 week

License: Creative Commons Attribution-NonCommercial-ShareAlike CC BY-NC-SA version 4.0 or later (CC BY-NC-SA 4+)

Story

Schematics, diagrams and documents

Circuit Diagram

Follow this diagram to make your own

Code

Arduino Automatic Candy Dispenser Machine

This is the code for the Arduino automatic candy dispenser

// Viral Science www.viralsciencecreativity.com www.youtube.com/c/viralscience
// Pill Candy Dispenser | Automatic | Touch less
#include <Servo.h> 
Servo servo; 
int pos; 
int Signal = 8; 
int servopin = 9;

void setup() { 
    pinMode(Signal, INPUT); 
    servo.attach(servopin);
    servo.write(0);         //close cap on power on
    delay(1000);
    servo.detach();
     } 
void loop() { 
    int buttonState = digitalRead(Signal);
     delay(1); 
    if (buttonState == 0) 
    { 
  servo.attach(servopin);
  delay(1);
  servo.write(90);  
  delay(3000);       //wait 5 seconds
  servo.write(0);    
  delay(1000);
  servo.detach();
    }
    }