Simple Lux Meter - Diy Light Intensity Meter

Learn how to build a Simple Lux Meter to measure light intensity using a BH1750 sensor, Arduino UNO, and Visuino!

Remote Control A Linear Actuator With Visuino & Arduino

Learn how to remotely control a 12V linear actuator using a 433MHz RF module, Arduino Uno, and Visuino!

Attiny85/13a Programming Shield For Arduino

No more messy wires! Looking for an easy way to program ATtiny85 & ATtiny13A microcontroller

Musclescroll:emg-powered Tab Navigation On Raspberry Pi 🔺🔻

This innovative project harnesses the power of EMG signals to enable intuitive and seamless navigation between web tabs & other interfaces.

Mr Krab's Tiny Violin

Ever wanted to sarcastically empathise with a sob story you dont care about? Then this build is for you. An emote brought to life!

Rp Pico As A 100 Mhz Logic Analyzer / Decoder

how to setup the Raspberry Pi Pico so it can be used as a 24 channel signal analyzer. You will also see some examples using the signal analyzer decoding some different protocols like a UART, I2C-bus and 1-wire.

Custom 3d Printed Cooling Case For Raspberry Pi 4b

Will guide you to make 3D printed cooling case for Raspberry Pi 4B

How To Set Up Raspberry Pi 5 For Ai Projects & Machine Learn

With the Raspberry Pi 5, you can dive into AI and ML right from your desk.

How To Make An Ai Chatbot Project

In this tutorial, we’ll use the CrowPanel ESP32-S3 Advanced HMI Display to create a voice-interaction chatbot!

Wio Terminal Gps Tracker With Dfrobot Gnss Sensor

Will guide you to develop a GPS tracker using Seeed Studio Wio Terminal and DFRobot GNSS Sensor

Raspberry Pi Status Logger With Python

We will guide you in implementing a Python script to monitor the status of the Raspberry Pi.

Check Indoor Air Quality W/ Blues, Ifttt, And Adafruit Io

Learn how to build an indoor air quality monitor using the Notecard Cellular from Blues to sync AQI sensor data with Adafruit IO and IFTTT.

Coda88 Piano Sampler Eurorack Module

An eurorack adaption of the Coda88 sampler by Sandrolab

Building A Low-cost Media Center With Raspberry Pi 5

Covering everything you need to set up a smooth and responsive media center using Raspberry Pi 5 – without overcomplicating things.

Ina226 Voltmeter & Gc9a01 Display Using Visuino

This tutorial shows how to use the INA226 Voltmeter with a GC9A01 Display in Visuino to measure and display voltage in real time.

Hexabitz Biosignal Logger 📊

The Hexabitz Biosignal Logger is a powerful and portable tool designed for capturing biosignal data using the Hexabitz EXG Monitor.

How To Design And Build Your Own Keyboard

In this tutorial you will design and build your own keyboard. You will also learn all the essentials to design and build any electronics.

How to Build a ‘Split the G’ Device

Built a device to perfectly 'Split the G' in Guinness using sensors & Arduino! 🍺🔧 Heading to Ireland to test it.