Electromaker Kit
$99.00
Build your own 3D printable GPS tracker to track your hikes, bike rides and other outdoor pursuits. You could even track your pet! Let us show you exactly how to build the device using our online video tutorial. We will provide you with all the components required to build the battery-powered tracking device. All you need to provide is some filament to print the small enclosure.
Already have some of the items listed below?
No problem, once on the checkout page you’ll be able to remove any items you already have and reduce the total cost of the kit.
|
GPS TinyShield | x1 |
|
Flash Memory TinyShield | x1 |
|
M3 6.0mm Screw Zinc Plated Steel | x3 |
|
TinyDuino Processor Board | x1 |
|
USB TinyShield Side Mount | x1 |
|
Lithium Ion Polymer Battery - 3.7V 70mAh | x1 |
|
USB Cable A/MicroB - 3ft | x1 |
View all
Shopping cart powered by Mouser.com
The TinyCircuits boards provided in the kit use push connections which allow for easy assembly. Simply click the boards together and upload our pre-written code. Once the GPS tracker is built you can start recording GPS co-ordinates! Power it on and take it somewhere. You can then plug it into your computer and upload the data to Google Maps to see exactly where it has been.
We have designed a range of attachment options for you to print including a clip for a belt, a strap connector for a bag and a GoPro foot.
No soldering required.
An Arduino powered, cardboard crafted skittle sorting machine. It's quick to build, easy to assemble and sure to divide opinion on the best colour of skittles.
The Disco Helmet is available now! Light up the room and be the envy of all your friends with is amazing Arduino powered, 3D printable helmet!
-card--jpg-1x.jpg)
